Desiccant Air Systems

Mountair can provide you with desiccant air systems of the following types: systems powered by solar batteries, with built-in thermal pump Desicool ®, with low-temperature secondary cooling.

It also means:
Low investment expenses
Lowered anticyclic consumption of energy

Absorbtion rotor connects molecules of the water, air passes through it. In a countercurrent, on the other hand, a rotor, the moisture which has been saved up in a rotor, leaves transferable weight together with recycled heat.

Due to the porous structure and fine pores of the transferring environment at disposal, there is a greater internal specific area. It makes it possible to get an excellent degree of regeneration at the minimal losses of pressure.

In moisture removal mode the rotor, depending on a stream of air weight/moisture, rotates in a range of 5-40 rev/min. Regulation of corresponding number of turns and bypass are calculated by the calculation system and are exposed at the factory with the collected drive (bypass is not always available). In winter operating mode, as restoration enthalpy increases the number of turns for the performance of the maximal efficiency, it follows a continuous establishing signal. The constant control over rotor performance is directly connected. The rotor is set in motion through transfer number of a reducer. Pressure of tension is kept to constants through spring hanger and compensates possible disbalance.

Simple check is guaranteed. Cleaning of the rotor is made by compressed air or water. Functions of protection and messages on defects, number of turns, as well as electric parameters (current, pressure, etc.) are supervised.